3107C OWNER’S MANUAL 2/01/23 Page 5 of 18
OPERATOR TRAINING
Everyone who operates a 3107C or assists the 3107C operator needs to know the following aspects of
machine operation before operating the 3107C. They are important and must be a part of operator
training.
Rental companies need to understand and be able to explain and demonstrate all of the machine
operations to each rental customer including:
•
KNOW AND UNDERSTAND ALL SAFETY POINTS AND CONSIDERATIONS
•
Check that all guards/covers and safety decals are in place
o
If an engine driven component is exposed or accessible, a guard is missing.
•
Know how to properly connect the 3107C to a towing vehicle
•
Know the towing position of the: swivel jack or stand; chipper hopper and rear flap
•
Know the operating position of the: swivel jack or stand, chipper hopper and rear flap
•
Understand the 3107C capabilities and intended use
•
Know how to start and stop the engine
•
Know how to engage and disengage the clutch
•
Understand how to prevent clogs
•
Know how to safely clear clogs from the chipper
For detailed instructions on 3107C operation see the operator’s manual in the canister attached to
the chipper hopper.
ROUTINE MAINTENANCE
Routinely check the condition, clean, tighten, repair, or replace as necessary the following:
•
Safety decals
•
Muffler guard
•
Fuel lines
•
Fasteners
•
Anvil
•
Belts
•
Chipper Blades
•
Engine Oil
•
Grease Points
Clean safety decals often using soap and water.
DO NOT
use abrasive cleaners or solvents such as
mineral spirits that will damage the decals. Replace any damaged (unreadable) or missing decals. If you
replace a machine part that has one or more decals affixed to it, replace the decals also. Replacement
parts and decals can be purchased from Barreto Manufacturing, Inc. When attaching decals, the
temperature of the mounting surface must be at least 40°F (5°C) and must be clean and dry.
DO NOT
pressure wash or hose down any bearing, water can enter the bearing and dramatically reduce
bearing life. Wipe away excess grease, dirt and grime that accumulate on or near a bearing.
Service the engine according to the engine owner’s manual. Follow the directions for all aspects of
service including air filter change, oil level checking, filling, draining, disposal of engine oil, disposal of
petrol/gasoline, and off-season long-term storage.
Off-season long-term storage of the 3107C can be at any ambient temperature.
