Barracuda NextGen F Series, Manual

Page: 5 / 7

Barracuda CloudGen Firewall
F900 Revision A 5 / 7
In order to establish a console connection to the appliance using a serial cable (Revision A: DB9,
Revision B: RJ45), you need to configure the serial port on the terminal using the following
parameters:
Parameter Value
Baud
19200
Bits 8
Stop bit 1
Parity None
Handshake None
LCD Display
Navigating
This security appliance features a key pad with four keys and an LCD panel on the left side of the
front panel. These may be used to obtain certain information and to perform certain commands
directly on the appliance.
Keyboard Button Command
Left arrow Navigates back or acts like an Escape key while working in the LCD menu.
Up arrow Navigates up or increases a value.
Down arrow Navigates down or decreases a value.
Right arrow Navigates forwards or acts like an Enter key for confirming a configuration step.
LCD Display Menu
You may use the LCD display and the keypad to access certain appliance features. Use the up
and down keys to navigate through the items of the main menu.
The LCD menu features the following items from top to bottom:
Menu Meaning
Appliance type, OS version, and
release number
This is the default display.
IP address and subnet mask
Shows the configured IP address and subnet mask of the
appliance.