Barracuda CloudGen Firewall
5 / 7
Port LEDs -
GREEN/YELLOW
Left
blinking
Data transfer – Yellow (10/100
Mbps)
Port in use.
Right
steady
-
Port is on.
PSU LEDs - GREEN
Steady
PSU modules connected and
running
Power supply unit is up and
running.
Off
Power defective, standby, or
shutdown
Power supply unit is off or in
standby mode.
Acoustic Signal Frequency
Meaning Installation
Beep
1 time
Unit starts booting
Beep
3 times
Installation is completed successfully and appliance is halted for
reboot. After reboot, one beep indicates booting.
Not all appliances support yellow and/or red LED colors. Depending on the appliance type, the
status LED might be on by default and it might take some time during boot and installation to
start either blinking or changing the color. Furthermore, the status LED might blink at different
frequencies.
Serial Console Port
In order to establish a console connection to the appliance using a serial cable (RJ45), you need to
configure the serial port on the terminal using the following parameters:
Parameter Value
Baud
19200
Bits
8
Stop bit
1
Parity
None
Handshake None
LC Display
Navigating
This security appliance features a key pad with four keys and an LCD panel on the left side of the
front panel. These may be used to obtain certain information and to perform certain commands
directly on the appliance.
