Page 3/7
Power connecting procedure:
STEP 1
Take out 4 pin terminal block located in the included mounting kit package.
STEP 2
Connect power wires to +V1- or +V2- with corresponding polarity. Connect the grounding
wire to the ground screw.
STEP 3
Plug into terminal block socket shown above. Polarity needs to match V+ and V-.
WARNING
Always SHUT OFF power source to connect power wire.
WARNING
Always ground the power source to maintain a clean power input. Cheaply made power
supplies create too much noise and will cause the power input to fluctuate when connect
to this unit. To avoid this, always ground the power source to maintain a clean power
input.
