Baroness LM315GC, Service Manual

Page: 98 / 199

Electromagnetic Clutch
The electromagnetic clutch is located in the left
side of the transmission.
It transmits/blocks the drive of the engine to the
transmission by the signals from each sensor
and switch.
Apply the parking brake.
Set the transmission selector lever to the
"LAP" position.
oqbkw8-003
1
Electromagnetic Clutch_001
1 Transmission selector lever
Remove the flexible wire from each mower
unit and then hook it on the hook of the
mower arm.
oqbkw8-006
4
3
2
5
1
Electromagnetic Clutch_002
1 Flexible wire
2 Clip
3 Mower unit
4 Mower Arm
5 Hook
Start the engine.
Lower the mower units.
1.
2.
3.
4.
5.
Turn "ON" the proximity sensor (reel rotation
switch).
Make sure that the electromagnetic clutch is
connected and the flexible wire drive belt is
driven.
Warning
Make sure not to touch the driven belt.
oqbkw8-004
1 2
Electromagnetic Clutch_003
1 Flexible wire drive belt
2 Transmission
Turn "OFF" the proximity sensor (reel
rotation switch).
Make sure that the electromagnetic clutch is
disconnected and the flexible wire drive belt
is not working.
oqbkw8-005
1 2
Electromagnetic Clutch_004
1 Flexible wire drive belt
2 Transmission
Stop the engine.
Install the flexible wire onto each mower unit.
6.
7.
8.
9.
10.
11.
LM315GC
Electrical system
Page 5-26 Electrical components