Groomer Clutch Lever
Note:
Depending on the specifications, this function
may not be available.
Caution
Shift the lever for setting to the arbitrary
position while the engine is stopped.
The groomer clutch lever has three changeover
positions.
When the lever is set to the "Normal " position,
the groomer rotates in the same direction as the
reel cutter (cutting cylinder).
When the lever is set to the "Reverse " position,
the groomer rotates in the opposite direction as
the reel cutter (cutting cylinder).
When the lever is set to the "Stop" position, the
groomer does not rotate.
1
C
B
A
68CA94B0
Groomer Clutch Lever_001
1
Groomer clutch lever
A
Normal
B
Reverse
C
Stop
Swisher Holder
Caution
Be careful not to hit your eyes with swisher
pole when it is in the swisher holder.
Swisher pole can be stored in this holder for
transport.
1
2DE16A63
Swisher Holder_001
1
Swisher holder
Instruments on The Operation Panel
2
3
1
8577524B
Instruments on The Operation Panel_001
1
Hour meter
2
Water temperature gauge
3
Pilot lamp
LM311
Description of Functions
Page 4-8
Groomer Clutch Lever
