Precautions for Maintenance
Warning
The chapter "Maintenance" in this manual
describes practical measures which should be
performed by a mechanic with expertise.
The owner should instruct the mechanic with
expertise to perform maintenance service for
this machine.
Caution
First, learn well the operations you plan to
perform.
Important
Use tools appropriate for each operation.
Important
Use Baroness genuine parts for replacement
and accessories.
Our product warranty may be void if you use
non-genuine parts for replacement or
accessories.
Position of Mower during Maintenance
Important
If the mower is left for a long time during
maintenance with the handle leaned on the
ground or with the handle hoisted up, the
engine oil will enter the engine combustion
chamber and cause the engine to run
improperly.
After leveling the engine, be sure to start the
engine in ten minutes to ensure sufficient time
for any oil to drain back.
Greasing
About Greasing
Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.
Greasing Points
Grease nipples are installed in the following
locations.
Add grease to A every 10 hours, and B every
50 hours.
If specified locations and periods are
additionally described below, follow the
instructions.
7
7
2
5
3
5
1
8
1
1 6
6
4
1
613E7697
Greasing Points_001
LM18GC
・
LM56GC / LM66TC
Maintenance
Page 6-2
Precautions for Maintenance
