Features of The MC Mower Unit
Equipped with a 6.4-inch (163 mm) -
diameter reel cutter (cutting cylinder).
Blade engagement can be adjusted by
changing the reel cutter (cutting cylinder)
position without changing the position and
angle of the bed knife (bottom blade), and
therefore the bed knife attitude does not
change due to wear of the reel cutter.
The angle of the bed knife (bottom blade)
can be adjusted according to the lawn
conditions.
The front roller is a grooved roller that will
not press down the lawn.
Grass clippings can be discharged either
forward or backward.
The grass catcher can be installed.
The groomer can be installed.
The CR brush can be installed onto the rear
roller.
The groomer and CR brush can be installed
at the same time.
The scraper can be installed on the front and
rear roller.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Names of Each Section
1
2
6
4
7
5
8
3
quwxcl-135
Names of Each Section_001
1
Reel cover
2
Reel cutter
3
Bed knife
4
Front roller
5
Rear roller
6
Groomer
7
Scraper
8
CR brush
LH62
・
LH66
Product Overview
Page 3-4
Names of Each Section
