24
2.
Press ENTER.
3.
Press ENTER when the unit displays “Printer
Attached?”
4.
When prompted with “Date Format” press the
UP or DOWN arrow to show the date format
desired. Press ENTER to select the desired for-
mat and continue.
5.
When prompted with “Set Date,” press the UP
or DOWN arrow to choose “Yes,” then press
ENTER.
6.
Press the UP or DOWN arrow until you reach
the desired month. Press ENTER.
7.
Press the UP or DOWN arrow until you reach
the desired day. Press ENTER.
8.
Press the UP or DOWN arrow until you reach
the desired year. Press ENTER.
9.
When prompted with “Set Time” press the UP or
DOWN arrow to choose “Yes,” then press
ENTER. This is to set the time of day.
10. Press the UP or DOWN arrow until you reach
the desired hour value. Press ENTER.
11.
Press the UP or DOWN arrow until you reach
the desired minute value. Press ENTER.
12. Press BACK twice to return to the (Idle) mode.
Setting the Cell Constant
The actual temperature and cell constants are attached to
the cell cable internal to the NANOpure DIamond unit.
This data helps ensure that the purity displayed is as
accurate as possible. The only time the user would need
to enter this data is if the cell or main board is being
replaced and/or updated.
1.
Shut power OFF to the unit and disconnect the
power cord.
U
SER
S
ETTINGS
