32
Replacing Oil
Motor housing - Set unit upright and refi ll with (see chart for type and amount) new cooling oil. Fill to
just above the end bell, (top), of the motor, as an air space must remain in the top of the motor housing
to compensate for oil expansion. Apply pipe thread compound to threads of pipe plug and assemble to
motor housing.
NOTE:
Reference oil chart for suitable replacement oils.
SUPPLIER
GRADE
OUNCES
BP
Enerpar SE100
96
Conoco
Pale Paraffi n 22
96
Mobile
D.T.E. Oil Light
96
G & G Oil
Circulating 22
96
Imperial Oil
Voltesso-35
96
Shell Canada
Transformer-10
96
Texaco
Diala-Oil-AX
96
*CONTACT CRANE PUMPS & SYSTEMS FOR A TYPICAL MSDS SHEET IF REQIIRED.
CAUTION: DO NOT OVERFILL OIL. OVERFILLING OF MOTOR HOUSING WITH OIL
CAN CREATE EXCESSIVE AND DANGEROUS HYDRAULIC PRESSURE THAT WILL
DESTROY THE PUMP AND CREATE A HAZARD.
OVERFILLING OIL VOIDS WARRANTY.
Figure
Figure
J
J
