Barnes 6DSE-L Series, Installation And Operation Manual

Page: 11 / 22

11
Reassemble by placing pump assembly on base (59) and as-
semble lockwashers (66) and hex nuts (70) through base and
into pump body. Place gasket (58) onto base (59) and elbow
(68). Assemble lockwashers (60) and hex nuts (61) through
elbow into pump and tighten evenly.
THREE PHASE 200-240 VOLT AC THREE PHASE 200-240 VOLT AC
Power Cable Power Cable Motor Lead Number Motor Lead Number
Green (3-Ground)* Green
Black 1 & 7
Red 2 & 8
White 3 & 9
T4, T5 & T6 Together
(*) Ground wires could be either 3 Green, or 1 Green and 2
Yellow or 2 Green and 1 Yellow.
THREE PHASE 480-600 VOLT AC THREE PHASE 480-600 VOLT AC
Power Cable Power Cable Motor Lead Number Motor Lead Number
Green (3-Ground)* Green
Black 1
Red 2
White 3
T4 & T7 Together
T5 & T8 Together
T6 & T9 Together
MOISTURE AND TEMPERATURE SENSORS MOISTURE AND TEMPERATURE SENSORS
Control Cable Control Cable Lead Number Lead Number
Green (Ground) Green
Black P1 (Temperature Sensor)
White P2 (Temperature Sensor)
Red W1 (Moisture Sensor)
Orange W2 (Moisture Sensor)
FIGURE 6
Friction
Ring
(49C)
FIGURE 5
Gland Nut (49B)
Power Cable (49A)
Friction Ring
(49C)
Grommet
(49D)
Conduit Box
& Cable
Assembly
(49)
Friction Ring
(49G)
Grommet
(49H)
Friction
Ring
(49G)
Gland Nut (49F)
Control
Cable
(49E)