12
terminal block (21) into the housing so it seats completely
below the snap ring groove. Place snap ring (19) into groove
in cord entry bore of housing.
F-4.4) Cord Assemblies:
Power Cord - Re
fi
ll the cooling oil as outlined in paragraph
F-1.3. Make wire connections as outlined in paragraph F-4.3.
Insert female end of cord plug into housing bore aligning timing
mark with hole in terminal block (21), see Figure 14. Compress
cord plug with compression
fl
ange (16a) by tightening hex bolts
(11) into the housing (6). Torque to 132 in-lbs.
SECTION: G REPLACEMENT PARTS
G-1 ORDERING REPLACEMENT PARTS:
When ordering replacement parts, ALWAYS furnish the
following information:
1. Pump serial number and date code. (Paragraph G-4)
2. Pump model number. (Paragraph G-3)
3. Pump part number. (Paragraph G-2)
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing Instructions.
G-2 PART NUMBER:
The part number consists of a six (6) digit number, which
appears in the catalog. A one or two letter suf
fi
x may follow
this number to designate the design con
fi
guration. This
number is used for ordering and obtaining information.
G-3 MODEL NUMBER:
This designation consists of numbers and letters which
represent the discharge size, series, horsepower, motor
phase and voltage, speed and pump design. This number is
used for ordering and obtaining information.
G-4 SERIAL NUMBER:
The serial number block will consist of a six digit number,
which is speci
fi
c to each pump and may be preceded by
a alpha character, which indicates the plant location. This
number will also be suf
fi
xed with a four digit number, which
indicates the date the unit was built (Date Code).
EXAMPLE: A012345 0490.
Reference the six digit portion (Serial Number) of this number
when referring to the product.
FIGURE 13
RETURNED GOODS
RETURN OF MERCHANDISE REQUIRES A “RETURNED GOODS AUTHORIZATION”.
CONTACT YOUR LOCAL CRANE PUMPS & SYSTEMS, INC. DISTRIBUTOR.
Products Returned Must Be Cleaned, Sanitized,
Or Decontaminated As Necessary Prior To Shipment,
To Insure That Employees Will Not Be Exposed To Health
Hazards In Handling Said Material. All Applicable Laws
And
Regulations
Shall
Apply.
IMPORTANT!
WARRANTY REGISTRATION
Your product is covered by the enclosed Warranty.
Complete the Warranty Registration Form and return to Crane Pumps & Systems, Inc.
Warranty Service Group If you have a claim under the provision of the warranty, contact
your local Crane Pumps & Systems, Inc. Distributor.
