Barnes 10CCE, Installation And Operation Manual

Page: 7 / 22

7
inches
(mm)
DISCHARGE ..................
3” (76mm) x 3” (76mm) NPT ,
Female
LIQUID TEMPERATURE
160°F (71°C) Continuous
INTERMEDIATE .............
Cast Iron ASTM A-48, Class 30
VOLUTE .........................
Cast Iron ASTM A-48, Class 30
BODY .............................
Cast Iron ASTM A-48, Class 30
PEDESTAL .....................
Cast Iron ASTM A-48, Class 30
IMPELLER Design ...........
Semi-Open
Material .........
Cast Iron ASTM A-48, Class 30
Dynamically Balanced, ISO G6.3
SHAFT ............................
Stainless Steel
SQUARE RINGS ............
Buna-N
HARDWARE ..................
300 Series Stainless Steel
PAINT .............................
Air dry enamel
SEAL Design ..........
Mechanical
Lubrication....
Self-Lubrication
Material ........
Rotating Faces - Carbon
Stationary Faces - Ni-Resist
Elastomer - Buna-N
Hardware - 300 series stainless steel
SHAFT SLEEVE ............
Bronze
CHECK VALVE:
Material ........
Valve Flap - Neoprene
Weight - Cast Iron ASTM A-48, Class 30
MOTOR: Design ..........
ODP
,
NEMA B, Three phase,
Torque Curve, C-Face, Footed,
Squirrel Cage Induction, Marine
Duty per USCG259 and AIEEE-45,
50 ˚ C Ambient
Insulation ......
Class B
THREE PHASE ..............
200-240/480 is Tri voltage motor.
OPTIONAL EQUIPMENT:
Seal Material, TEFC motors
MODEL
NO.
HP ODP MOTOR DESIGN TEFC MOTOR DESIGN
VOLTS PH RPM
(NOM)
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
WEIGHT
NET LBS
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
20CCE 10 200-230/460 3 3450 28/14 162/81 294 12 @ 460 115 @ 460
OPTIONAL
MOTOR
FRAMES
“A” DIMENSION
215T - OPD 213T - TEFC 215T - TEFC
25.69 (653)
26.88 (683) 27.63 (702)
IMPORTANT!
1.)
DO NOT
USE FOR PUMPING FLUIDS WITH A FLASH POINT OF LESS THAN 100°F.
2.) MAKE CERTAIN THAT PUMP AND/OR MOTOR ASSEMBLY AND CONTROLS HAVE THE APPROPRIATE RATINGS FOR THE GIVEN
APPLICATION AREA CLASSIFICATION (ie DIVISION I, AGENCY LISTING ETC.)
SECTION: A - PUMP SPECIFICATIONS: 20CCE