BARMATIC ICE20A, User Manual

Page: 7 / 32

7
1.3 DISCARDING & ENVIRONMENT
At the end of the life of the appliance, please
dispose of the appliance according to the
regulations and guidelines applicable at the time. Throw packing materials like plastic and boxes in the
appropriate containers.
2. FOREWORD
This appliance (machine) has been designed by
our technical staff and produced in our factory
with decades of experience and the greatest care
in or- der to achieve the very highest quality
standards. Our ISO 9001 certified quality system
allows us to keep all company processes under
control, to en- sure continuous improvement of
the quality and safety of our products.
Read this manual immediately; it will help you to
get to know your machine better. If installed and
used correctly, in accordance with the
instructions, your machine will not present any
risks or hazards for the user.
It is important always to follow the instructions in
this manual.
The user must never access the compressor -
con- denser compartment or tamper with the
control and safety devices in any way.
Read our recommendations for correct use and
optimum application of your ice-making machine
and it will give you troublefree service over a long
working life.
Please always state the model and serial number
of your appliance in all communications with the
manufacturer or our representative.
3. OPERATION
Implement the following operations before
activat- ing the ice maker:
1.
Verify that the ice maker has not been damaged
during transport.
2.
Remove all the material provided from the con-
tainer: supply pipe, drain pipe, documentation
and any accessories.
3.
Clean inside the container with a sponge damp-
ened with warm water and a little sodium bicar-
bonate; rinse with clean water and dry carefully.
4.
Place the ice maker in its definite location and
en- sure that it is perfectly level (fig. 1).
Fig. 1
EN