Bar Maid Model BLE-300 Commercial Blender
|
5
ASSEMBLy
BEFORE FIRsT usE
Before using your blender for the first time, remove any packaging material and promotional labels.
Ensure the appliance is switched off at the power outlet and the power cord is unplugged. Wash the lid,
inner lid, Eastman Tritan™ Container and blade assembly in warm, soapy water with a soft cloth. Rinse
and dry thoroughly. Do not place parts in the dishwasher (with the exception of the lid and inner lid).
The container lid and inner lid may be washed in the dishwasher. The motor base can be wiped with
a damp cloth. Dry thoroughly.
AssEMBLINg ThE BLENDER
1.
Place the motor base on a flat, dry surface. Ensure that the motor base is switched off and the power
cord is unplugged. Turn the blender container upright and insert on to the motor base.
2.
Plug the power cord into a power outlet. The handle of the container can be positioned to the left or right
hand side of the appliance.
DIsAssEMBLINg ThE BLENDER
1.
Always ensure your blender is switched off. Then unplug the power cord.
2.
Remove the container from the motor base by grasping the handle and lifting the container in an upward
direction. Remove the blade assembly by upturning the container and twisting the blade removal
clockwise, then lift upwards and away from the base of the blender.
3.
Remove the silicon seal from the blade assembly.
AuTOMATIC OVERLOAD PROTECTION
Your motor is designed to protect itself from overheating. If the motor shuts OFF, turn OFF the power switch
for up to 45 minutes to reset. To reduce reset time unplug the machine, remove the container and blow air
into the center section. Press the reset button on bottom of blender, if equipped.
POWERCORD
Your machine is equipped with a long power cord. Store the unused portion neatly underneath.
BOTTOM VIEW/CORD WRAP
Plastic cord retainers hold the cord securely. There is no need to unscrew the cord retainers to let out more
cord. They are flexible and return to position after the cord lifted out.
