Phone: +61 (0)2 4271 8244
Email: [email protected]
Web:
www.barkbusters.net
INS-STM-007-01-BK
8
Socket Head
Bolt 50mm
DRI-LOC
PN:
M6x50SHCSZP-DL
Pcs.
2
1
Storm
Plastic
PN:
SP1
Pcs.
1 Left & 1 Right
2
Saddle
PN:
Storm-Saddle
Pcs.
2
3
Mush Head
Screw
PN:
SCREWPT3.5x14
Pcs.
4
4
Black
Screw
PN:
STSZ811MX11
Pcs.
2
5
Aluminium
Bar (Black)
PN:
BAR-S-011
Pcs.
2
6
Bar End
LEFT
PN:
BE-ST-L
Pcs.
1
7
Bar End
RIGHT
PN:
BE-ST-R
Pcs.
1
CAUTION:
Installation of the handguard is safety-relevant work and can be complicated. We recommend the installation be performed by a motorcycle
service technician. Rideworx accepts no liability for damages caused by improper mounting. All screws, bolts and nuts, including all
replacement hardware provided by Rideworx, should be tightened to the torque specified in the table. After the first 50km of riding check all
screws, bolts and nuts are tightened to the correct torque. We recommend a medium strength liquid thread lock product on all fasteners.
WARNING:
Check operation of all handlebar controls, specifically the throttle, front brake, kill switch and clutch to ensure they are operating correctly and are
in accordance with the OEM specifications. Do not ride the motorcycle if any controls are not operating correctly. Check periodically that all bolts
are tight.
12
Locking
Adaptor
PN:
S7-LA2
Pcs.
2
13
Spacer
12mm
PN:
S7-SP12
Pcs.
2
Flat Head
Bolt 16mm
DRI-LOC
PN:
M8x16FHCSZP-DL
Pcs.
2
11
Flat Head
Bolt 50mm
DRI-LOC
PN:
M8x50FHCSZP-DL
Pcs.
2
10
9
Flat Head
Bolt 40mm
DRI-LOC
PN:
M8x40FHCSZP-DL
Pcs.
2
M6
10 Nm (7.4 lbf ft)
M8
20 Nm (14.8 lbf ft)
Recommended Torque Settings
14
Bolt
Adaptor
PN:
S7-BA
Pcs.
2
Bar Side View
X
Disclaimer:
A failure to follow these fitting instructions could cause serious injury, death or property damage. These handguards are intended solely for use with motorcycles/ATV/snowmobiles/
scooters that have not been modified. They are not designed to prevent injury or death while riding or in an accident or crash. The user must ensure that all controls are free of the
handguards every time that they ride. By installing and/or using this product you acknowledge that you accept these terms and have followed the fitting instructions.
JET-003
VPS-003
STM-003
BCF-003
Personalise Your Protection
Guard options sold separately
NOTE:
Thread lock on bolts is for
single use ONLY.
If reinstalling, apply new
thread lock.
