PRODUCT MANUAL - BARIX R6 - V01.03 - 07/20/2005
J2 and J4 (Molex, p/n 22-27-2041, 4A max) are provided for easy
connection of multiple devices, and are located at the left and
right sides. They carry the unregulated supply voltage and RS-485
bus signals.
Pin
Function
1 VCC
(+)
2
VSS (-)
3
RS-485 A
4
RS-485 B
J1 can be used to connect the supply voltage and the RS-485 bus
to the relay unit. These screw terminals are electrically identical to
the expansion connectors J2 and J4. In addition, a “reference
ground” and “Signal GND” pin is provided. Reference ground is
connected to the Signal ground of the Barionet R6 via a 100 Ohm
resistor and can be used for grounding applications. “Signal GND”
is the system ground of the R6 – which is NOT identical to the
supply “VSS” pin – and is used for measuring purposes only.
Pin
Function
1 Reference
GND
2
RS-485 A
3
RS-485 B
4
VCC (+ or ~)
5
VSS (- or ~)
6
Signal GND
Connectors • 5
J1 Pin out (RS-485
and Power)
J2, J4 Pin out
Extension Connectors
Summary of Contents for R6
Page 2: ......