manualshive.com logo in svg

BARIX EXSTREAMER, User Manual

Share
Download
BARIX EXSTREAMER User Manual Download Page 12

 

 

Exstreamer User Manual Version 1.7 

 

 

UDP Streaming Listen Port 

Use this parameter to configure the UDP streaming listen 
port on which the Exstreamer is listening for a stream. 
The listener is always active. The Exstreamer has to be 
stopped before a stream can be sent to this port. 
 

General settings 

Start Threshold 

The Start Threshold is the amount of bytes the Exstreamer 
will buffer the stream before starting the playback. Valid is a 
value from 0 to 65535. 

Init Sequence 

This command sequence is always executed immediately 
after startup. See the Exstreamer Technical Documentation 
for a complete list of commands. 

 

 

7.5 Audio 

settings 

 
You only need to adjust this section if you would like your 
Exstreamer to start up with custom sound adjustments. 
For example you would like your Exstreamer to always 
start with maximum bass, than you could adjust that here 
to become default. These adjustments will be stored even if 
the unit looses power.  

 

 

Volume

 

Choose between "0%" and "100%" in 5% steps. 

Mute Volume

 

Choose "On" to mute the sound output at startup else 
choose "Off". 

Lock Volume 

Choose "On" to lock volume on the control interface. This 
denies the volume control by the user. "Off" allows free 
volume control. 

Balance 

Choose between "Left max." and "Right max." (L10..R10). 

Bass

 

Choose between "-10" and "10". 

Treble

 

Choose between "-10" and "10". 

Loudness Level

 

Choose between "0" and "20". 

Loudness

 

Switch the Loudness "On" or "Off". 

Configuration Auto Store

 

Stores the configuration automatically 30 sec after the last 
change in the control interface. The stored parameters are 
volume, mute, volume lock, balance, bass, treble, loudness 
on/off, shuffle and repeat.  

Output Mode 

Select Stereo, Mono or Bridge. If Mono is selected the 
audio output is always mono. On Bridge mode the right 
channel is inverted and audio output is mono. The Bridge 
mode is used to allow a bigger output signal. 
 

7.6 Playlist 

settings 

This settings adjust the playlist properties. 

 

Own Name

 

You can enter the name of the Exstreamer here. This name 
is displayed in the file info frame on the device status page. 
This name will be returned when using the DISCOVER 
command (see technical documentation) and will be used 
for the SYNC function by other Exstreamers. 

Shuffle

 

This action automatically shuffles the media files inside a 
playlist and plays them randomly non stop. 

Repeat

 

If "Off" then nothing is repeated. If "Song" is selected the 
actual song is played non stop. If "Playlist" is selected the 
actual playlist is repeated non stop. 

Walk Through Playlists

 

If set to "Yes", then it will play the next playlist after the 
last one finishes. With "Yes" all playlists will play back to 
back automatically. 

Playlist Path Match String / Subst String

 

If the path of a song in a playlist starts with the match 
string, it will be replaced with the subst string. 

 

Summary of Contents for EXSTREAMER

























Reviews:

No comments

Brands by name

Popular brands

Load more brands