Annuncicom IC User Manual Version 01.20
Page
7
7
Device Configuration
To enter the Annuncicom IC device configuration
you can
log onto its local web server.
STEP 1
Open your web browser
STEP 2
Type in the IP address of the Annuncicom IC and press
Enter
Example: 192.168.0.12
STEP 3
Click on the Config button
7.1 Configuration
Overview
A MENU
FRAME
This frame shows the available menu icons.
A click on SETTINGS brings you to the settings page when
you are on the DEFAULTS, REBOOT or UPDATE page.
A click on HOME brings you to the device status page.
B INFO
FRAME
This frame shows the Annuncicom IC’s MAC address and
the installed version of Firmware, Web application,
Bootloader and Setup.
C
SETTING TABS
This bar shows the available tabs within the settings menu.
D HELP
FRAME
This frame shows the help to all settings and menus.
7.2
Network settings
Here you can configure the Annuncicom IC’s
Static IP
address.
With this you can set a permanent IP address so that the
device does not have to get a new one upon power-up.
We recommend that you set a
Static IP
address.
IP Address
Enter the 4 values of the desired device IP address e.g.:
"0.0.0.0" for automatic discovery (DHCP, IPzator, AutoIP)
"192.168.0.12" for an internal LAN
Netmask
Enter the 4 values of the desired
Static IP
e.g.: "255.255.255.0" for a C class network.
Gateway IP Address
Enter the 4 values of the desired Gateway IP address e.g.:
"0.0.0.0" for no Gateway
"192.168.0.1" for a Gateway in a LAN
Note
: The Gateway has to be set only when connecting to
other devices over the WAN (through a router).
Use SonicIP
If set to yes, the Annuncicom IC will announce its IP
address over the audio output.
To store these settings click on Apply button.
The device will restart with the new settings.
B
A
D
C
