3
• This appliance is intended to be used in
household and similar applications such as
staff kitchen areas in shops, offices and other
working environments; holiday homes, hotels
and other residential settings; and catering
and similar non-retail applications.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of knowledge and
experience if they have been given supervision
or instruction concerning the use of the
appliance in a safe way and understand the
hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance
shall not be made by children without
supervision.
• INTRODUCTION
•
Sleek and compact design with tempered
mirror glass door to reflect UV light and help
protect your wine. Temperature range between
5-18°C controlled by touch screen controls.
(Recommended ambient temperature up to
25°C). Features soft white LED light. Waved
metal shelves with space for up to 18 bottles
of wine. Accommodates a maximum bottle
height of 330mm. Compressor cooling
technology with automatic defrost feature
to make this unit as easy as possible to use.
Energy Efficiency Class G.
• SPECIFICATION
• Model no: DH6.V2
•
Capacity: 18 bottles
•
Max. bottle height: 330mm
•
Temperature range: 5-18°C
•
Rated current: 0.6A
•
Voltage: 220-240V
•
Frequency: 50Hz
•
Energy efficiency class: G
•
Noise level: 43dB
•
Dimensions (W x D x H): 345 x 450 x 770mm
•
Volume: 50L
• INSTALLATION
• The unit is designed to be free-standing.
Ventilation Space - a minimum space of 50mm
is required for the rear of the fridge and 30mm
for the top and both sides. This will maximise
the efficiency, performance and life of the
fridge and also ensure that there is sufficient
space for the hinge to operate effectively.
• Locate the unit away from direct sunlight or
sources of heat i.e. radiator, stove etc. Extreme
or cold ambient temperatures may also
prevent the unit working effectively.
• DO NOT
locate the unit in a damp or moist
location.
•
Ensure that the floor surface is strong and
stable enough to support the unit when it is
fully loaded.
• Level the unit when in location by using the
adjustable levelling feet in each corner.
• Once in position allow the unit to rest for an
hour before turning it on.
•
Allow the unit 2-3 hours to reach set
temperature after switching on before placing
any items in the compartment.
• OPERATION
• To turn the unit on, press the
symbol.
• The unit’s control panel will automatically lock
out after 20 seconds of non-use.
• To unlock the control panel hold the
symbol for approximately 2 seconds when
an audible noise will be emitted to signify an
active state.
• To turn on internal light press symbol.
The light will turn off after 10 minutes.
• To change the temperature units displayed,
press and hold the
symbol for
approximately 2 seconds.
• To set the required operating temperature use
the symbol to increase it, and the
symbol to decrease it. Each press will cause a
1
o
change in the set value.
• MAINTENANCE
• Remove the power plug from the supply when
performing cleaning or maintenance.
• DO NOT
use abrasive or chemical cleaning
materials on any surface of the unit.
• Wipe interior and exterior surfaces with a
damp cloth and dry thoroughly with a clean
dry cloth.
• For more soiled surfaces use a neutral
detergent, wipe down with a clean damp cloth
and dry thoroughly with a clean dry cloth.
