baridi DH6.V2 Quick Start Manual Download Page 2

Important Information

Please read these instructions carefully and note any safe operational requirements, warnings & 

cautions. Use the product correctly and with care for the purpose for which it is intended. Failure 

to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these 

instructions safe for future use.

•  ELECTRICAL SAFETY

•  WARNING! 

It is the user’s responsibility to 

check the following:

•  Check all electrical equipment and appliances 

to ensure that they are safe before using.  

Inspect power supply leads, plugs and 

all electrical connections for wear and 

damage. Dellonda recommend that an RCD 

(Residual Current Device) is used with all 

electrical products. You may obtain an RCD 

by contacting your local domestic stockist. 

If the product is used in the course of 

business duties, it must be maintained in a 

safe condition and routinely PAT (Portable 

Appliance Test) tested.

•  Electrical safety information:

  It is important 

that the following information is read and 

understood.

•  Ensure that the insulation on all cables and on 

the appliance is safe before connecting it  

to the power supply. 

•  Regularly inspect power supply cables and 

plugs for wear or damage and check all  

connections to ensure that they are secure.

• 

Important: 

Ensure that the voltage rating on 

the appliance suits the power supply to be  

used and that the plug is fitted with the correct 

fuse - see fuse rating in these instructions.

• 

DO NOT

 pull or carry the appliance by the 

power cable.

•  DO NOT 

pull the plug from the socket by the 

cable. 

• 

DO NOT

 use worn or damaged cables, plugs or 

connectors. 

•  Ensure that any faulty item is repaired or 

replaced immediately by a qualified electrician.

• 

This product is fitted with a BS1363/A 13 Amp 

3 pin plug. If the cable or plug is damaged 

  

  during use, switch off the electricity supply      

    and remove from use. Ensure that repairs are  

    carried out by a qualified electrician.

• 

Replace a damaged plug with a BS1363/A 13 

amp 3 pin plug. If in doubt contact a qualified 

electrician.

 

 

A) Connect the GREEN/YELLOW  

 

earth wire to the earth terminal ‘E’.

 

B) Connect the BROWN live wire to the  

 

live terminal ‘L’.

 

C) Connect the BLUE neutral wire to  

 

the neutral terminal ‘N’.

•  Ensure that the cable outer sheath extends 

inside the cable restraint and that the restraint 

is tight. 

•  Dellonda recommend that repairs are carried 

out by a qualified electrician.

•  GENERAL SAFETY

•  DO NOT

 store explosive substances such as 

aerosol cans with a flammable propellant in 

this appliance.

•  WARNING: 

Ensure the supply cord is not 

trapped or damaged.

•  WARNING: DO NOT

 locate multiple portable 

socket-outlets or portable power supplies at 

the rear of the appliance.

Replacement fuse rating:

13A

Refer to

instructions

Indoor use 

only

Warning:

  flammable 

material

Summary of Contents for DH6.V2

Page 1: ...Black Model No DH6 V2 Thank you for purchasing a Baridi product from the Dellonda range Manufactured to a high standard this product will if used according to these instructions and properly maintained give you years of trouble free performance DH6 V2 Issue 1 15 12 2020 ...

Page 2: ...at the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse see fuse rating in these instructions DO NOT pull or carry the appliance by the power cable DO NOT pull the plug from the socket by the cable DO NOT use worn or damaged cables plugs or connectors Ensure that any faulty item is repaired or replaced immediately by a qualified el...

Page 3: ...nd 30mm for the top and both sides This will maximise the efficiency performance and life of the fridge and also ensure that there is sufficient space for the hinge to operate effectively Locate the unit away from direct sunlight or sources of heat i e radiator stove etc Extreme or cold ambient temperatures may also prevent the unit working effectively DO NOT locate the unit in a damp or moist loc...

Page 4: ...inually improve products and we reserve the right to alter data specifications and parts without prior notice No liability is accepted for incorrect use of this product Guarantee is 12 months from purchase date proof of which is required for any claim Symptom Solution Unit does not operate Not plugged in Fuse circuit breaker failure Turns on and off frequently Poor cooling Room temperature higher ...

Reviews: