Page 12
Page 13
LED 36 User Manual rev. B
©2011 Bargeheights, Inc.
Master/Slave Mode
Up to 32 LED 36s may be connected via the 3-pin DMX connec-
tions and controlled simultaneously without a DMX controller by
using Master/Slave Mode. In this mode you can set one fixture
in the line to act as the master controller – and up to 32 other
fixtures can be connected and will mirror the operation of the
Master.
• Press <MENU> until the control mode is displayed.
(
dnCo
or
Auto
or
SCAE
)
• Press <+> or <-> to select Slave Mode. (
SCAE
)
• Press <ENTER> to assign your selection.
Connect LED 36 fixtures and set them in Slave Mode and they
will operate mirroring the first fixture. Do not set the first fix-
ture in Slave Mode - only the other fixtures.
Technical Specifications:
Model:
LED 36
LEDs:
36 x 1watt (12 Red, 12 Green, 12 Blue)
Voltage:
100-250v / 50-60Hz
Dimensions:
9in (h) x 9in (w) x 12in (l)
230mm (h) x 230mm (w) x 310mm (l)
Weight:
11lbs (5.0Kg)
Power
Consumption:
60 watts
DMX Channels:
6 channels
Beam Spread:
25 degrees (beam) 35 degrees (field)
Setup & Addressing: LED Menu display – no dip switches!
Photometric Data:
Throw Distance
3.0m
9.8’
5.0m
16.4’
7.0m
22.9’
Beam Diameter
1.34m
4.4’
2.22m
7.3’
3.14m
10.3’
Illuminance (lux)
3110
1470
646
Photometric data taken with all channels at full. Due to varia-
tions in all LEDs, these values should be considered approxi-
mate. All LED sources experience a lowering of output and
some color shift over time. LED output varies with ambient
operating temperatures.