Page 4
Page 5
LED 36 User Manual rev. B
©2011 Bargeheights, Inc.
Introduction
• PAR-style LED Wash Luminaire
• Full RGB color mixing via 36 x 1w LEDs
(12 Red, 12 Green, 12 Blue)
• High output, low power consumption
• Variable electronic strobe
• Variable electronic dimmer
• Master/Slave modes
• Built-in standalone modes - no controller required!
• RGB color mixing ability in standalone mode
• Rugged aluminum chassis
• Locking yoke
• Quiet internal fan for cooling
DMX Quick Reference
Channel
Function
1
Overall Intensity
2
Red Intensity
3
Green Intensity
4
Blue Intensity
5
Strobe
6
Color / Strobe Effects
2.
SAFETY
INFORMATION
• DO NOT connect the fixture into a dimmer. Use constant line voltage only to
avoid damage.
• Make sure you are connecting the fixture to line voltage that is not higher
than the voltage stated on the rear of the fixture.
• The LED 36 is for indoor use only. Do not expose the fixture to rain, or other
moisture like your bathtub.
• Do not operate the fixture with flammable items nearby. NEVER lay anything
on the fixture while it is on.
• Give it space! The LED 36 needs at least 6in (15cm) from other surfaces and
objects. Make sure that none of the ventilation or fan slots are blocked.
• ALWAYS disconnect the fixture from its power source before servicing or
cleaning.
• ALWAYS secure your LED 36 using a safety cable. NEVER hang or carry it by
its cord. It has a yoke for a reason!
• DO NOT operate when the ambient temperatures are higher than 104°F
(40°C). If it’s too hot for you, it’s too hot for your LED 36!
• If your LED 36 stops working properly, stop using it immediately. NEVER try
to repair it yourself. Attempting repairs in the field can result in damage or
injury. Please contact us for repairs or replacement.
• Make sure the power cord is not frayed or damaged.
• Never disconnect the power cord by pulling on the cord. Use the plug!
• Avoid direct eye exposure to the light source while it is on. It’s cool looking,
and fun to watch, but staring into the light can damage your eyes!
There are no user serviceable parts inside this fixture. Do not
open the housing or attempt any repairs yourself. Not only is it
a bad idea, it will void your warranty – which is a bummer when
you need a working light! If you do need service, please contact
Bargeheights. Damages sustained as a result of modifications
to the fixture, or disregarding information in this manual will
not be covered by your warranty. If something is wrong, let us
take a look at it. We’ll help you out!
!
Caution!