TECHNICAL PRODUCT INFORMATION
Barel reserves the right to change technical specifications without further notice
4
Technical datasheet HFX and HFXE_LED_26
3.2 Mechanical data:
-
Aluminium housing fastened with 2 screws in the plastic end-caps, c-c 276mm.
4
Installation
These components do not cause harm or injury when used as specified in these instructions. If this
equipment is not utilized in a manner specified by the manufacturer, the protection by the equipment
may be impaired.
Inrush current and circuit breaker characteristics/amount of units per circuit breaker must be
considered in the installation.
Do not energize circuit before all components and lamps are connected properly.
In case of no function or malfunction: first de-energize the circuit. Disconnect mains and battery
supply before lamps are disconnected.
· Connect all components and lamps.
- HFXE only; connect battery.
· Check that all connections are made to the correct port, tightened to the correct torque and that
no wires are loose or damaged.
- The LED module must be connected to correct polarity. Do not operate the unit without
lamp properly connected.
· Energize the unit from mains supply.
· The lamp will light up in normal mode.