manualshive.com logo in svg

Bardiani Valvole BBZS1, Operating And Maintenance Instructions Manual

Share
Download
Bardiani Valvole BBZS1 Operating And Maintenance Instructions Manual Download Page 5

BBZS1

BBYS1

A

A

BARDIANI VALVOLE reserves the right to modify without notice its products, including products already ordered.

(GB-IST-BBZS1-0312) 5/16

4.  Installation

Manual 

Valve

1.  AVOID VALVE OVERLOADING AND COMPENSATE FOR:

- Vibration

- Thermal expansion

2. CORRECT FLOW DIRECTION:

- If possible, have flow against valve closing direction to 

avoid or minimise water hammer.

3. VALVE CONNECTIONS/UNIONS:

- Ensure tight connections between valve and piping.

- Remember gaskets and fit correctly.

- Tighten unions firmly and carefully.

4. WELDING VALVE BODY INTO PIPING:

- Remove inner valve parts.

- Weld body carefully into piping.

- Assemble valve.

- See assembly instructions.

5. INSTALLING VALVE INTO PIPING:

- Ensure sufficient clearance for valve disassembly.

VALVE SIZE

BBZS1  
A (mm)

BBYS1  
A (mm)

DN10-25

270

270

DN32-40

290

290

DN50

305

305

DN65

325

325

DN80

345

345

DN100

365

365

Summary of Contents for BBZS1

















Reviews:

No comments

Brands by name

Popular brands

Load more brands