manualshive.com logo in svg

Bardiani Valvole BBZS1, Operating And Maintenance Instructions Manual

Share
Download
Bardiani Valvole BBZS1 Operating And Maintenance Instructions Manual Download Page 4

A

B

BBZS1

BBYS1

(GB-IST-BBZS1-0312) 4/16

BARDIANI VALVOLE reserves the right to modify without notice its products, including products already ordered.

3. Receiving/Unpacking/Storage

ATTENTION!

- Openings

Packing

material

Valve 

safety 

guards!

1.  UNPACK AND  CHECK  VALVE 

DELIVERY:

A. Complete valve.

B. Instruction Manual.

2. IDENTIFY VALVE TYPE SUPPLIED:

BBZS1:

 by-pass valve

BBYS1:

 by-pass valve with steam barrier

3. LIFTING OF WEIGHY VALVES:

- Use lifting tool, if necessary.

- Fix the valve to lifting tool.

4. HANDLING OF LOOSE VALVE PARTS:

- Avoid falling loose valve parts

- Assemble and tighten loose valve parts.

5. PACKING MATERIAL:

- Inspect the interior of the valve.

- Remove material and dispose of 

according to current directives.

6. INSPECTION/CLAIMS:

- Document/check for damage, missing 

or wrong parts.

- Follow current claim procedures, if 

necessary.

7.STORAGE/PROTECTION:

- Avoid dust, humidity, wet areas, 

heat etc.

- Avoid vibration.

- Min.: - 10 °C

- Max.: + 50 °C

Summary of Contents for BBZS1

















Reviews:

No comments

Brands by name

Popular brands

Load more brands