background image

Manual 2100-502A
Page

1 of 15

IMPORTANT SAFETY NOTE:  You must know how to turn off gas and electricity to air conditioner/gas furnace.
Your qualified installer, service agency or gas supplier can teach you to use controls and switches.

We're pleased you've chosen our air conditioner/gas furnace to supply your cooling/heating needs.  Please
keep this manual in a safe, yet readily available place.  It contains important and useful information.

ATTENTION, INSTALLER:  After installing air conditioner/gas furnace, give the user:

• User's Information Manual

• Parts List

• Installation Instructions

• Warranty Information

ATTENTION, USER!  Your installer should give you the above four important documents relating to your
air conditioner/gas furnace.  Keep these as long as you do your equipment.  Pass these documents on to later
purchasers or furnace users.  If any of the four documents are missing or damaged, contact your installer or
manufacturer for replacement.  For efficient service, please give your unit model and serial number, from
Section 1 or from your serial rating plate.

USER'S INFORMATION MANUAL

WG3S, 4S & 5S - Series Combination Gas/Electric Wall-Mount

Manual:

2100-502A

Supersedes:

2100-502

File:

Vol. I, Tab 20

Date:

09-05-08

Bard Manufacturing Company, Inc.
Bryan, Ohio 43506

Since 1914...Moving ahead, just as planned.

Thank you for reading these safety statements.

Please read on so you will know how to maintain your air conditioner/gas furnace for years of dependable service.

         WARNING

Do not use this air conditioner/gas furnace if any part has been under water.  Immediately call a
qualified service technician to inspect the unit and to replace any part of the control system
and any gas control which has been underwater.

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of

this or any other appliance.

• WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone.  Follow the gas

supplier's instructions.

• If you cannot reach your gas supplier, call the fire department.
• Installation and service must be performed by a qualified installer or the gas supplier.

          WARNING

If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or loss of life.

         WARNING

Read and follow all safety information in this manual, operating instructions and furnace safety
labels.  Failure to follow safety precautions could result in damage, injury or death.

Summary of Contents for WG3S Series
















Reviews: