Manual 2100-696A
Page
5 of 17
Remove blank off plates on both sides (behind side
grilles) and discard (see Figure 4).
Remove exhaust blank off plate through return or
through side intake openings (see Figure 5).
Install 1913-013-2708 gasket 5/8" from bend as
shown in Figure 6. Then install exhaust blade assembly
using 10 screws (see Figure 7).
Blank Off Plate
FIGURE 4
Remove Blank Off Plates (Both Sides)
FIGURE 5
Remove Exhaust Blank Off Plate
Remove both air filters and the low voltage inner control
panel cover (see Figure 8).
Air Filters (2)
Low Voltage Inner
Control Panel Cover
FIGURE 8
Remove Air Filters and
Low Voltage Inner Control Panel Cover
Exhaust Blank Off
Plate
Exhaust Partition
FIGURE 6
Install Gasket
FIGURE 7
Install Exhaust Blade Assembly
Exhaust Blade
Assembly