Manual 7960-856
Page
2 of 2
Installation
1. Disconnect all power to unit.
2. Remove control panel inner and outer covers.
3. Mount start kit (PTCR) in position shown in Figure
1.
4. Connect wires between terminals (HERM) and (C)
of dual can capacitor as shown in Figure 1.
5. Recheck wiring. Refer to Figure 1.
6. Attach “CMC-32” label above the wiring diagram
on the inner control panel cover.
7. Replace all panels and covers. This completes the
installation.
FIGURE 1
MIS-4094
1
CAPACITOR
1
YE
LLOW
NOTE: TOP VIEW OF
CAPACITOR SHOWN
2
YELLOW
2
