![background image](http://html1.mh-extra.com/html/barco/wepresent-wipg-1000/wepresent-wipg-1000_user-manual_3834146013.webp)
3. Standby Screen of the Projector/Display
3. STANDBY SCREEN OF THE PROJECTOR/DISPLAY
Overview
•
3.1
Quick Guide
Start Sharing Your Screen
The following information will be shown on the standby screen of the projector/display: (a) software download instructions; (b) WiFi
network name or SSID [Default SSID is WiPG-1000-xxx (where xxx are the last three numbers of the MAC ID shown on the bottom
side of the WiPG-1000 device)]; (c) IP address [default IP address is 192.168.100.10]; (d) login code.
If any sender device is connected to the WiPG-1000, click on
and a list of connected sender devices will be shown on the
standby screen. The conference moderator can use the USB mouse/keyboard to select which device to use and control it remotely.
Image 3-1
Start Screen
If you need more advanced information, click the “Setup” icon
, and you can
fi
nd the
fi
rmware (FW) version, resolution, and
WiFi security information; you can also make a Plug & Show USB token.
Image 3-2
Advanced Information
The screen saver mode is activated if no sender device is connected. The system returns to the standby status immediately when
any sender device is connected.
R5906158 WEPRESENT WIPG-1000 31/01/2018
9
Summary of Contents for WePresent WiPG-1000
