![background image](http://html.mh-extra.com/html/barco/vision-708/vision-708_owners-manual_474390029.webp)
Random Access Adjustment Mode
6-4
5975639 BARCOVISION 708 161198
Decoding
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the
normal American IRE standard or via the European EBU standard.
Highlight Decoding by pushing the control disc up or down and press
ENTER to toggle between IRE and EBU (only available when a NTSC
video signal is connected to the projector).
Select with or
<ENTER> to accept
<EXIT> to return.
Select with or
<ENTER> to accept
<EXIT> to return.
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
CHROMA DELAY : ON
ENHANCED BLUE : ON
LINE DOUBLER : ON
ENTER will toggle Decoding between IRE and EBU.
EXIT will return to the Random Access Adjustment menu.
Chroma Delay
Only for PAL or SECAM video signals.
When a PAL video signal is connected to the projector, the chroma
delay has to be set on PAL. When a SECAM video signal is connected
to the projector, the chroma delay has to be set on SECAM.
Highlight Chroma Delay by pushing the control disc up or down and
press ENTER to toggle between PAL and SECAM (only available
when a PAL or SECAM video signal is connected to the projector).
Select with or
<ENTER> to accept
<EXIT> to return.
ENTER wil toggle Chroma Delay between PAL and SECAM.
EXIT will return to the Random Access Adjustment menu.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
CHROMA DELAY : ON
LINE DOUBLER : ON
Line Doubler (option)
Line doubling is only possible for Video, S-Video, Component
Video images on standard line frequency and RGB signals on 15
kHz.
To eliminate the video line patterns and to improve the image
stability, the line doubler has to be switched on. The line doubler
is default set in the ON position when starting up for the first
time. The setting of the line doubler will be saved together with
the source number. Each time this source number is selected,
the last saved version will be loaded.
Highlight Line Doubler with the control disc and press
ENTER
to
toggle between ON (active) and OFF (non active).
EXIT
will return to the random access selection menu.
Color Select
Highlight
COLOR SELECT
by pushing the control disc up or down
and press
ENTER
to display the color select menu.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
CHROMA DELAY : ON
LINE DOUBLER : ON
ENTER
continues to the color select menu.
EXIT
will return to Internal Crosshatch Selection or Setup
Pattern Selection Menu.
ADJUST
returns to operational mode.
Use the control disc to highlight a color (CRT) or combination of colors
to display the projected image in that specific color.
To select a new color, press
ENTER
, the color selection menu
appears again on the screen. To terminate the color select proce-
dure, press
EXIT
.
ENTER
continues with the selected color or color combina-
tion.
EXIT
returns to the Random access main menu.