Connections
3-2
5975639 BARCOVISION 708 161198
Source No Projector input
Press digit button
1
Comp. Video
1
2
S-Video*
2
3
RGBS or RGsB**
3
3
RGB3S or RG3sB***
4
3
(R-Y)Y(B-Y)S or
(R-Y)Ys(B-Y)****
5
3
(R-Y)Y(B-Y)3S or
(R-Y)Y3s(B-Y)*****
6
Connecting a Composite Video source.
Composite video signals from a VCR, OFF air signal decoder, etc..
If a line doubler is built in :
the default position of this line doubler is ON (active), the
video input signal will be displayed as a non interlaced
image (= improved image stability).
To enable or to disable this line doubler function, enter the
adjustment mode and change the position of the ON/OFF
toggle switch (see Picture tuning in chapter 'Guided' adjust-
ment mode or 'Random access' adjustment mode).
Video input selection :
a. with the RCU : press digit button 1 or
b. with the local keypad.
(for access to the local keypad, see 'Local keypad' in chapter
'Location and function of controls'.)
- press
ADJUST
key, the General access menu is displayed
on the screen.
- use the control disk to highlight
1
.
- press
ENTER
to select the highlighted source.
*
Input signal Y/C (luma/chroma)
**
Input signal : R, G and B with composite sync on G or
separate composite sync
***
Input signal : R, G and B with Tri level sync on G or
separate Tri level sync.
****
Input signal : R-Y, Y and B-Y with composite sync on Y
or separate composite sync
*****
Input signal : R-Y, Y and B-Y with Tri level sync on Y or
separate Tri level sync.
TV tuner, e.g. TVDM40 stereo
VCR
Audio amplifier
Composite
video
COMM PORT
(800 peripherals) REMOTE
R
G(S)
B
S
VIDEO
S-VIDEO
R- Y
Y(S)
B-Y
RS232 OUT
RS232 IN
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
