Installation Adjustments
7-5
5976026A BARCOVISION 708 200499
Optical lens focusing
The optical focusing procedure is performed separately for each
lens. The appropriate CRT will be switched on as the user proceeds
through the optical focusing adjustment sequence.
Each lens has two focus adjustment points, one at the rear of the lens
and one at the front. The center of the projected image is focused
by loosening the wing nut at the rear end of the lens and rotating the
lens barrel until the center of the image is clearly focused. The
corners of the projected image are focused by loosening the wing
nut at the front end of the lens and rotating the lens barrel until the
corners of the image are clearly focused. Repetition of these
adjustments may be necessary to optimize optical focusing.
Press
ENTER
key to continue.
XXXX = respectively red, green and blue.
Electrical focusing
The electrical focus for red, green and blue is factory preset. When
they have to be readjusted, follow the procedure as described
below:
- Ensure the lenses are correctly focused.
- Open the top cover.
- Adjust separately the focus control for red and green for the
sharpest image on the screen.
Warning :
The blue focus has been factory adjusted for optimal color reproduc-
tion. Readjustment of the blue focus will effect color temperature and
color tracking.
Adjust only if really necessary. Mark first for future reference the
blue focus control before adjusting.
Focus adjustment should be done with hight contrast settings.
&RUQHU
IRFXVLQJ
&HQWHU
IRFXVLQJ
Electrical focus
Red Green Blue
OPTICAL LENS FOCUSING
<ENTER> to continue
<EXIT> to return
1. LOOSEN THE NUT ON THE
REAR OF THE XXXX LENS,
ROTATE THE LENS BARREL
TO FOCUS THE CENTER
OF THE IMAGE,
THEN TIGHTEN THE NUT
2. LOOSEN THE NUT ON THE
FRONT OF THE XXXX LENS
AND ROTATE THE FRONT
SECTION OF THE LENS TO
FOCUS THE CORNERS OF THE
IMAGE, THEN TIGHTEN THE NUT.
Summary of Contents for Vision 708 9002357
