APPENDIX B : ORBITING
AP
P
E
NDI
X
B
: O
RBI
TI
NG
APPENDIX B : ORBITING
AP
P
E
NDI
X
B
: O
RBI
TI
NG
R5975238A BARCOVISION 701 MULTIMEDIA 200697
R5975238A BARCOVISION 701 MULTIMEDIA 200697
B-2
B-2
Master/slave toggle
Highlight 'CHANGE TO SLAVE'
with the control disk and press
ENTER to set the projector as
Slave.
Highlight 'CHANGE TO MASTER'
with the control disk and press
ENTER to set the projector as
Master.
Orbiting ON/OFF toggle (only in Master Orbiting)
Highlight 'MODE : ON' with the
control disk and press ENTER to
set the ORBITING OFF.
Highlight 'MODE : OFF' with the
control disk and press ENTER to
set the ORBITING ON.
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
SLAVE ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO MASTER
ADJUST DEVIATION
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
ENTER toggles between mode on and
off.
EXIT returns to the Path Selection menu.
Master/slave toggle
Highlight 'CHANGE TO SLAVE'
with the control disk and press
ENTER to set the projector as
Slave.
Highlight 'CHANGE TO MASTER'
with the control disk and press
ENTER to set the projector as
Master.
Orbiting ON/OFF toggle (only in Master Orbiting)
Highlight 'MODE : ON' with the
control disk and press ENTER to
set the ORBITING OFF.
Highlight 'MODE : OFF' with the
control disk and press ENTER to
set the ORBITING ON.
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
SLAVE ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO MASTER
ADJUST DEVIATION
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
ENTER toggles between mode on and
off.
EXIT returns to the Path Selection menu.