SERVICE MODE
R5975228A BARCOVISION 701 MULTIMEDIA 200697
SER
VI
C
E
M
O
D
E
SERVICE MODE
R5975228A BARCOVISION 701 MULTIMEDIA 200697
SER
VI
C
E
M
O
D
E
9-6
9-6
Note : all projectors leave the factory after a burn-in period of approximately 100
hours.
This item is password protected.
Highlight 'Change Password' with the
control disk and press ENTER.
ENTER will display the selected item.
EXIT will return to the Path Selection
main menu.
ADJUST will return to the Operational
mode.
PASSWORD
Use and to select,
and reprogram
with numeric keys.
<ENTER> to confirm
<EXIT> to return
Enter new password :
1 9 9 2
Change password
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
The current password is displayed.
The new password must consist of 4
digits between 0 and 9. Push the
control disk to the left or to the right to
select the digits to be changed. Use
the numeric keys to enter the new
digits.
Press ENTER to save the new pass-
word. Before saving the new pass-
word, a confirmation screen will be
displayed.
Press EXIT to return to the Projector
Set-up menu without saving the new
password.
ENTER displays the Confirmation menu.
EXIT returns to the Service mode with-
out saving the new password.
Note : all projectors leave the factory after a burn-in period of approximately 100
hours.
This item is password protected.
Highlight 'Change Password' with the
control disk and press ENTER.
ENTER will display the selected item.
EXIT will return to the Path Selection
main menu.
ADJUST will return to the Operational
mode.
PASSWORD
Use and to select,
and reprogram
with numeric keys.
<ENTER> to confirm
<EXIT> to return
Enter new password :
1 9 9 2
Change password
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
The current password is displayed.
The new password must consist of 4
digits between 0 and 9. Push the
control disk to the left or to the right to
select the digits to be changed. Use
the numeric keys to enter the new
digits.
Press ENTER to save the new pass-
word. Before saving the new pass-
word, a confirmation screen will be
displayed.
Press EXIT to return to the Projector
Set-up menu without saving the new
password.
ENTER displays the Confirmation menu.
EXIT returns to the Service mode with-
out saving the new password.