![background image](http://html1.mh-extra.com/html/barco/udx-4k32/udx-4k32_user-manual_3869477059.webp)
9. GUI – System Settings
2. Disable Automatic. Put the switch to the left. The switch becomes gray.
3. Use the
▲
or
▼
key to select
Address
and press
OK
button to activate the input box.
4. Use the
▲
or
▼
key to change the selected character.
Use the
◄
or
►
key to select another character.
Note:
Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
5. Repeat steps 4 and 5 for the Subnet mask and Default Gateway.
6. Select
APPLY
and click
OK
to con
fi
rm all changes.
When the connection is established, it is indicated with the connection symbol and the indication
Connected
.
9.2
GSM con
fi
guration
Only possible when a GSM module with SIM card is installed in the projector.
What can be done ?
To con
fi
gure the projector software with the installed SIM card, a correct PIN code (4digits) must be entered.
As the PIN code cannot be checked with the one on the SIM card, ensure to enter the correct PIN code.
When your SIM card is blocked, you have to remove the SIM card from the GSM module and to insert the SIM
card in a mobile phone so that you can enter the PUK code to unblock the SIM card.
How to activate
1. In the main menu, select
System Settings
→
Communication
→
GSM
.
Image 9-5
Communication menu, GSM
The GSM pin code input menu is displayed. The current con
fi
gured PIN code is indicated next to Pin input
fi
eld. If the code is
still the same, it is not necessary to enter the PIN code again. If it is a PIN code, continue with next step.
Image 9-6
Enter PIN code
2. Enter the 4 digits of the pin code and select
APPLY
and click
OK
.
R5906112 UDX SERIES 24/05/2017
55
Summary of Contents for UDX 4K32
