• 5,200 lumens (ISO 21118)
• Native XGA (1,024x768) resolution
• High contrast ratio
• BrightEra
®
panel
• Screen fitting
- H/V keystone adjustment
- 4 corners and 4 sides
• Fine lens shift
• Flexible 1.5x manual zoom standard lens
• Blend-in design
• Long-lasting lamp
Recommended lamp replacement time 4000h (Standard mode)
• Synchronized lamp and filter maintenance cycle
• Energy efficient design
- Auto power saving mode
- Blank with lamp dimming
- 4 lamp mode (High, Std, Low, Auto*)
*Auto lamp control by picture brightness
- ECO MODE key
• Convenient terminals including HDMI, RS-232C and RJ-45
• 10W speaker output
Basic Installation Projector
VPL-CX275
XGA / 5,200 lm
Optical
Light Output /
Color Light Output
5200 lumens (Lamp mode: High)
4400 lumens (Lamp mode: Standard)
LCD Panels
0.79”x3 BrightEra LCD Panel
Panel Display Resolution
XGA (1024x768 dots)
Contrast Ratio
3,000:1 (Full white/full black)*
1
Light Source
Ultra high-pressure mercury lamp 280 W type
Recommended Lamp
Replacement Time*
2
3000H (Lamp mode: High)
4000H (Lamp mode: Standard)
Filter Cleaning Cycle *
2
Max. 4000H
Same time as the lamp replacement is recommended
Projection Lens
Zoom / Focus Approx. 1.5x Manual Zoom / Manual Focus
Lens Shift
Manual, Ve/- 3.3%
Hori /- 2.5%
Throw Ratio
1.32:1 to 1.91:1
Screen Size
40” to 300”
Interface
Computer and
Video
Input/Output
INPUT A
Mini D-sub 15-pin (RGB/Y Pb Pr)
Audio: Stereo mini jack
INPUT B
Mini D-sub 15-pin
Audio: Stereo mini jack
INPUT C
HDMI (Digital RGB/Y Pb Pr, Digital Audio)
(HDCP support)
VIDEO IN
Phono jack
Audio : Shared with S VIDEO IN
S VIDEO IN
Mini DIN 4-pin
Audio : Phono jack (x2)
Monitor OUT
Mini D-sub 15-pin
(from INPUT A and INPUT B)
Audio OUT
Stereo mini jack (variable out)*
3
Other Signal
Input / Output
RS-232C
D-sub 9-pin
LAN
RJ-45, 10BASE-T/100BASE-TX
General
Speaker
10Wx1 (monaural)
Scanning Frequency
H: 19 to 92 kHz, V: 48 to 92 Hz
Display
Resolution
Computer
Signal Input
Maximum display resolution :
1600x1200 dots
Video
Signal Input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p,
576/50p, 720/60p, 720/50p, 1080/60i,
1080/50i
Color System
NTSC3.58, PAL, SECAM, NTSC4.43,
PAL-M, PAL-N, PAL60
UPC Code
0 27242 85972 2
Power Requirements
AC 100 V to 240 V, 3.9 A to 1.7 A, 50 Hz/60 Hz
Power Consumption
390 W (AC 100 V-120 V)
367 W (AC 220 V-240 V)
Standby Mode
Power Consumption
3 W (Std)/<0.5 W (Low) (AC 100 V-120 V)
3 W (Std)/<0.5 W (Low) (AC 220 V-240 V)
Dimensions (WxHxD)
(without protrusion)
406x113x330.5 mm
15 31/32x4 7/16x13 ”
Mass
5.6 kg/12 lb 6 oz
Optional Accessories
Replacement Lamp
LMP-C280
Service Parts
Replacement Filter
4-415-960-01 (COVER,FILTER)
4-415-961-01 (MESH,FILTER)
(Filters are cleanable)
Replacement Remote
1-489-222-11 (RM-PJ7)
*
1
The value is average with lamp dimming.
*
2
Expected maintenance time not guaranteed. Lamp and filter performance will vary based on
operating environment and use.
*
3
Works as an audio switcher function. Output from a selected channel, not available in standby.
.
Key Features
Connector Panels
Dimensions (Front)
Unit: mm (inches)
Dimensions (Bottom)
© 2012 Sony Corporation. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. The values for mass and
dimension are approximate. The Sony make.believe logo and BrightEra are trademarks of Sony. The HDMI logo and HDMI High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries. All other trademarks are the property of their respective owners
.
9/12
For more information:
www.sony.com/projectors
