Barco TransForm A, User Manual

Page: 38 / 202

3. Getting started
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
3-21
3.2.7 Quad Analog Video Card
The Q
UAD
A
NALOG
V
IDEO
C
ARD
provides the capability of displaying video signals like VCR, TV, CCTV etc. The analog
video signals are digitized for further processing in T
RANS
F
ORM
A. Four video signals per Q
UAD
A
NALOG
V
IDEO
C
ARD
can
be processed simultaneously.
Standard
The video standard Composite Video (VHS, FBAS, CVBS, CVS, Y) is supported.
Connectors
The Q
UAD
A
NALOG
V
IDEO
C
ARD
provides four BNC connectors for video insertion.
1
7
5 6
8
2
3
4
9
Figure 3-27
connectors of Q
UAD
A
NALOG
V
IDEO
C
ARD
1 video channel 1
2 video channel 2
3 video channel 3
4 video channel 4
5 green LED channel 1
6 green LED channel 2
7 green LED channel 3
8 green LED channel 4
9 RJ45 GPIO connector (
reserved)
Table 3-1
channels of the Q
UAD
A
NALOG
V
IDEO
C
ARD
Order
Within a single Q
UAD
A
NALOG
V
IDEO
C
ARD
the numbering of the video channels is as shown in the figure above. The
order in that the input cards are inserted into T
RANS
F
ORM
A is as follows:
•
In an OmniBus configuration the input cards are plugged into the PCI slots of the O
MNI
B
US
devices, please
refer to section 3.2.15 OmniBus .
•
In a Processor configuration the input cards are inserted into the PCI slots following the O
MNI
S
CALERS
. If
more than one input card is built-in, they are numbered in the sequence of the PCI slots, please refer to sec-
tion
3.2.16 Extender .
Specifications
For detailed technical specifications of the Q
UAD
A
NALOG
V
IDEO
C
ARD
please refer to section 7.1 Technical data .