CHAPTER 2
SolaSpot LED Setup and Configuration
SolaSpot LED
TM
User Manual
15
Powering On the Fixture
To power on the SolaSpot LED fixture, simply connect it to a 100V-240V AC power source.
Once the SolaSpot LED fixture is connected to a power source, it automatically begins a homing
procedure to verify that fixture components are functioning.
Shutting Down the Fixture
A DMX controller can shut down the fixture remotely with the Shutdown option in the Control
Channel or you can simply disconnect from power. The SolaSpot LED fixture automatically shuts
down in the event of DMX data loss longer than five minutes.
WARNING:
This equipment is designed for connection to a branch circuit having
a maximum overload protection of 20 A.
CAUTION:
Do not power on the fixture until
verifying
that the line cord cap is
suitable for the power source in your location. For more information,
see
Installing a Power Cord Cap
on page 8.
Disengage Pan and Tilt locks before operating the fixture. For more
information, see
Pan and Tilt Locking
on page 7.
Do not unplug motor harnesses while unit is powered.