CHAPTER 2
SolaSpot LED Setup and Configuration
SolaSpot LED
TM
User Manual
9
Mounting the Fixture
You can mount your SolaSpot LED fixture suspended from a support system (such as a truss) or
freestanding on its base.
Note:
Due to the wide variety of possible lighting designs, High End Systems
cannot make specific mounting recommendations. Consider the following
procedures as suggested guidelines only.
Mounting the Fixture Upright
To mount the fixture upright, place the fixture on a sturdy, stable non-flammable surface that will
support more than the
24.5 kg (54 lb) weight of the SolaSpot LED fixture. If the surface is above
floor height, use safety cables to secure the fixture to the surface.
Truss Mounting
When mounting the fixture on a truss or another type of support:
• Verify the truss or support will handle the combined weight of all the devices on the truss.
Each SolaSpot LED fixture weighs 24.5kg (54 lbs).
• Always mount a SolaSpot LED fixture using the mounting bracket assembly that shipped with
your fixture and a safety cable attached to the fixture’s base.
WARNING!
Equipment suitable for dry locations only. Do not expose this
equipment to rain or moisture.
CAUTION!
SolaSpot LED fixtures must be installed and operated by trained
personnel only.
Always use a secondary safety cable when mounting this fixture.
Do not mount within .5 meters (1.6 feet) of a flammable object.
CAUTION!
Do not mount the fixture upright without the four rubber feet
attached.
WARNING!
Before mounting, disconnect power to the fixture. If it has been
operating, allow the fixture to cool for five minutes before handling.
