![background image](http://html1.mh-extra.com/html/barco/sim-7d/sim-7d_user-manual_4241687025.webp)
4. Installation
Back focal length adjustment is also needed after the projection lens installation. See "Back focal length
adjustment", page 44 for detailed procedure.
Necessary tools
•
Torx screwdriver T10
•
Nut spanner or socket spanner 10 mm
•
Allen key 2 mm
How to prepare the projector lens?
1. Screw in 3 Allen bolts M4 into the lens
fl
ange. See image 4-15 and image 4-16
Tip:
Make sure the bolts do not completely go through the
fl
ange.
2. Fix a nut M4 to the Allen bolts. Do not tighten yet.
Image 4-15
Screws to lock the lens scheimp
fl
ug settings (left side)
Image 4-16
Screws to lock the lens scheimp
fl
ug settings (right side)
How to mount the lens on the projector and adjust the Scheimp
fl
ug?
1. Remove the top lens cover (6 screws)
Image 4-17
Top lens cover:
fi
xing screws
2. Remove the bottom lens cover (3 screws)
R59770198 BARCO SIM 7D 13/02/2013
21
Summary of Contents for SIM 7D
