![background image](http://html1.mh-extra.com/html/barco/sim-7d/sim-7d_user-manual_4241687162.webp)
8. Maintenance
Image 8-17
Electronics
fi
lter: push it in.
4. Tighten the two screws to
fi
x the electronics
fi
lter cover
Image 8-18
Electronics
fi
lter cover:
fi
xation screws
5. Register the air
fi
lter replacement in the
Service book
8.4
Lamp replacement
Description
The projector lamp must be replaced at the end of its
lifetime
. The projector will automatically display a warning when the end of
lifetime is coming near.
W
ARNING
:
Never touch the lamp before it has cooled down for at least 15 minutes!
W
ARNING
:
This lamp must be handled with the appropriate care which is needed for short arc lamps! Han-
dling a hot lamp or handling a lamp without care considerably increases the risk of explosion!
W
ARNING
:
Electrical shock hazard! Make sure to switch off and unplug the projector before starting any of
these procedures! Never remove any cover while the projector is on.
158
R59770198 BARCO SIM 7D 13/02/2013
Summary of Contents for SIM 7D
