Barco SIM 7D, Installation Manual

Page: 15 / 25

3. Mounting the rugged frame
3. MOUNTING THE RUGGED FRAME
Overview
• Inserting a T-nut inside the rugged frame
• Fixing the front frame to the bottom frame
• Mounting the projector to the rugged frame
• Fixing the lens clamp assembly to the projector lens
• Fixing the bottom frame
3.1 Inserting a T-nut inside the rugged frame
How to insert T-nut inside the frame assembly?
1. Position the T-nut in the same alignment as the frame slider slot
2. Insert the T-nut inside the frame slider slot. See arrow 1 image 3-1
3. Rotate the T-nut along its axis (clockwise 90°) inside the rugged frame slot
Note: Make sure that T-nut is fi xed properly inside the rugged frame slot
1
2
Image 3-1
Inserting the T-nut
1. Push the T-nut inside the frame slider slot
2. Rotate the T-nut to 90° clockwise
3.2 Fixing the front frame to the bottom frame
Necessary tools
Allen key 4.0 mm (hexagonal)
How to fi x the front frame to the bottom frame?
1. Put the front frame to the bottom frame
2. Use 2 frame brackets B361840 ,4 screws B362189 and 4 T-nuts B362188 to fi x the front frame to the bottom frame
R59770377 RUGGED FRAME 07/04/2009 11