![background image](http://html1.mh-extra.com/html/barco/sim-7d/sim-7d_installation-manual_4052173015.webp)
3. Mounting the rugged frame
3. MOUNTING THE RUGGED FRAME
Overview
•
Inserting a T-nut inside the rugged frame
•
Fixing the front frame to the bottom frame
•
Mounting the projector to the rugged frame
•
Fixing the lens clamp assembly to the projector lens
•
3.1
Inserting a T-nut inside the rugged frame
How to insert T-nut inside the frame assembly?
1. Position the T-nut in the same alignment as the frame slider slot
2. Insert the T-nut inside the frame slider slot. See arrow 1 image 3-1
3. Rotate the T-nut along its axis (clockwise 90°) inside the rugged frame slot
Note:
Make sure that T-nut is
fi
xed properly inside the rugged frame slot
1
2
Image 3-1
Inserting the T-nut
1. Push the T-nut inside the frame slider slot
2. Rotate the T-nut to 90° clockwise
3.2
Fixing the front frame to the bottom frame
Necessary tools
Allen key 4.0 mm (hexagonal)
How to
fi
x the front frame to the bottom frame?
1. Put the front frame to the bottom frame
2. Use 2 frame brackets
B361840
,4 screws
B362189
and 4 T-nuts
B362188
to
fi
x the front frame to the bottom frame
R59770377 RUGGED FRAME 07/04/2009
11
Summary of Contents for SIM 7D
