![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408046.webp)
5. Setup
Image 5-4
7. Press
ENTER
The projection is adapted and a bullet shows the active con
fi
guration.
5.5
Adjusting the lens
What must be done ?
Depending on the projection distance and the lens used, the image may not be at the desired size, position and/or may be out of
focus.
The projector will always allow you to shift your image Vertically as well as horizontally to position it on the screen. In addition,
motorized lenses will also allow you to Zoom and focus the image.
All these lens parameters can be adjusted using the RCU, the local keypad or in the Installation menu of the projector’s OSD.
•
Zoom (only for motorized lenses)
•
Focus (only for motorized lenses)
•
horizontal/vertical Shift
The lens can also be adjusted via the dedicated keys on the remote.
How to Zoom/focus or shift via the RCU (or keypad)
1. Press
LENS ZOOM
or
LENS FOCUS
or
LENS SHIFT
on the RCU
3
1
4
2
L
ENS
ZOOM
L
ENS
SH
IFT
L
ENS
FOCUS
VO
L
CO
NTR
BRIGHTN
Image 5-5
2. Use the arrow keys to adjust
42
R59770324 SIM 5W 22/12/2011
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...