![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408020.webp)
4. Installation
Length with different lenses : see table
Cold air IN
Cold air IN
69
20
Cold air OUT
415
487 (length without Cable Basket)
45
78
305
281
152
380
195
Image 4-1
4.1
Battery installation in the RCU
How to install the battery
Two batteries are packed together with the RCU. Before using your RCU, install
fi
rst these batteries.
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Insert the batteries as indicated in the RCU.
4. Put the battery cover on its place.
How to replace the batteries in the RCU
To replace the batteries :
1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Push on the + side of the battery towards the - side
4. Lift up the battery at the same time.
16
R59770324 SIM 5W 22/12/2011
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...