![background image](http://html1.mh-extra.com/html/barco/s3-series/s3-series_user-manual_3891629125.webp)
6. EM GUI orientation
How to add Output
Outputs con
fi
gurations can be added manually to unassigned connectors.
1. Click on the
Add Output
button.
The
Add Output
button is replaced by the
Done Adding
button (highlighted in blue).
2. In the System diagram area, click on the connector(s) that need to be assigned.
Note:
If the output is 4K provided by the 4 SDI connectors, the 4 SDI connectors need to be selected.
Connector(s) is immediately highlighted in blue.
3. The selection is completed by clicking the
Done Adding
button that is highlighted in blue.
A new Output is added in the output list.
How to delete Output
1. Click on the
Delete Output(s)
button
The
Delete Output(s)
button is replaced by the
Delete Selected
button (highlighted in red).
2. Click on the corresponding connector in the graphical area.
Or,
click in the “x” on the right hand side in the output con
fi
guration list.
Connector(s) is immediately highlighted in blue.
3. The deletion is completed by clicking the
Delete Selected
button.
Multiple connector con
fi
gurations can be selected to be deleted together.
You can only delete Output Con
fi
gurations that are not assigned in Destinations.
How to access to the output con
fi
guration adjustments
Adjustments to outputs are performed in the “Adjust” panel:
1. Select the output from the con
fi
guration list
Or,
clicking on the connector graphic.
An output is selected.
2. Click on the
Adjust
tab that is on the top of the Adjustment area.
R5905948 EVENT MASTER DEVICES 17/07/2017
121
Summary of Contents for S3 series
