31
OSD Description
1. Press the MENU button on the remote control or on the back of the projector to
bring up the OSD Menu.
2. You will see seven functional menus (Input, Image, Layout, Lamp, Alignment,
Control and Service). Press
◄
or
►
to select the desired sub menu.
3. Press ▲ or ▼ to select the desired sub menu.
4. Your current selection in each of the sub menu will be displayed in yellow text and
highlighted in blue. Press
◄
or
►
to access the configuration for the selected
item or press ENTER to go to another sub menu.
5. Press
MENU
to return to the previous menu.
6. From the main menu, press
MENU
to close the OSD Menu.
INPUT
Input Selection
Use this function to specify the source of image connected to the rear of the projector. For
instance, if you have connected your PC as the video input source,
you can choose RGB D-15(RGB-HV/SOG) to be the input for image projection.
Options of input available on the projector include:
HDMI1, HDMI2, RGB D-15(RGB-HV/
SOG), YUV1, YUV2(RGBHV/YUV2), Composite Video(Video), S-Video, RGB-S, SDI/
HDSDI/3G.
Input Configuration
This function is only available for input sources RGB D-15, YUV1 and RGBHV / YUV2.
Options for Input Configuration include Auto, YUV HD, YUV STD, RGB-PC and RGB-Video.
The default setting Auto should work for most application signals. Use this function to
switch among YUV HD, YUV STD, RGB-PC and RGB-Video if the input signal format is not
matched with the Auto setting.
6
OSD Menu description
