27
Using the remote control
5
1
3
2
4
1
5
INPUT
ASPECT
RATIO
AUTO IMAGE
PAUSE
TEXT
MENU
SHARPN
PHASE
COLOR
TINT
ADDRESS
SWAP
PIP
1
3
4
6
7
2
5
1.
ON
This button is used to turn on the
projector.
2.
OFF
This button is used to turn off the
projector.
3.
1
2
3
4
5
These buttons on the remote control
are the hotkeys for different image
source. By factory default, these are:
1 = HDMI 1
2 = RGB D-15
3 = RGBHV/YUV2
4 = YUV1
5 = Composite Video
You can configure the input source
that corresponds to each button in
the OSD Menu. To do so:
When press
MENU
> CONTROL > Button
1~5; use the
▼▲
buttons to choose from
diffferent sources of input. You can choose
from: HDMI 1,HDMI 2,RGB D-15,YUV
1,RGBHV/YUV 2,Composite Video,S-Video
and RGB-S.
For example, if you have configured
1
as
RGB D-15 in the OSD Menu, when you press
1
on the remote control, the projector will
display the image from RGB D-15.
4.
▼▲►◄
Use these buttons to make your
selection or configure, adjust
configuration or toggle between
image displays.
ENTER
Use this button to select items in the
menu or confirm the settings you
have changed.
When press ENTER , You also recall
LENS ADJUST when menu is off.
5.
ASPECT RATIO
You can scroll through different
aspect ratios by pressing this button
repeatedly. For more information,
refer to " Page 2 : INDEX ".
6.
MENU
Press this button to show or hide the
OSD Menu.
7. Various image adjustment buttons
PAUSE
PAUSE
Use this button to halt projection
temporarily.
TEXT
TEXT
When TEXT is set to ON, the
user will be able to operate the
OSD Menu normally.
When TEXT is set to OFF, only
ON, OFF, 1~5, SWAP, PIP,
