![background image](http://html1.mh-extra.com/html/barco/rhdm-2301/rhdm-2301_user-manual_3809077016.webp)
16 _____________________________________________________Barco - RHDM-2301 - User manual
First operation
Figure 3: Control panel – power button
•
Check the functionality of the control panel.
Wiggle the track ball. When the
buttons of the control panel do not light up while the power LED is green, check if
the USB cable and the power cable between the display unit and the control panel
are properly connected. For more information, please consult the installation
instructions in the addendum to connect the control panel to the display unit.
2.4 How to register the display unit
Registration of your product will enable Barco to establish a link to the product at your
site. When the display unit is started up for the first time, a “Welcome” message will be
shown. It is not possible to operate the display unit without its registration at the Barco
website. To register your product, follow the instructions below:
Write down the “current pincode” of the display unit that is displayed on the screen.
Figure 4: “Welcome” message at first start-up
1
Power button
2
Track ball
1
2